Frequently Asked Questions
Yes,This data is registered on the platform reference to the assigned driver.
15 minutes
Yes,This data is registered on the platform reference to the assigned driver.
Yes, we have a driver performance report which rates drivers according to Speeding, Harsh acceleration/braking. Additional parameters can be configured on the device and the platform also has wide array of reporting options
52g
160mm (d) x 52mm (h)
Yes,This data is registered on the platform reference to the assigned driver.
No, the Meitrack MVT100 does not support driver identification.
2800 mAh
Yes, the Meitrack MVT100 supports remote immobilisation of the vehicles engine.
1Hour
Yes, Diablo II can be connected or paired with a fuel level sensor, which detect suspicious behaviour in the fuel tank such as sudden unscheduled drainage of the tank which will help prevent fuel theft and provide indisputable evidence in case of investigation into such actions.
No, the Diablo I does not support fuel level monitoring.
500g
Yes, the Blanco supports remote immobilisation of the vehicles engine.
No, the Meitrack MVT100 does not support fuel level monitoring.
Yes. We call this as “Driver Access” feature. Only authorized keys/fobs registered on the tracking device can start the vehicle.
Yes. We call this as “Driver Access” feature. Only authorized keys/fobs registered on the tracking device can start the vehicle.
Yes, this feature is availbale in SicuroPeople Application.
Yes. We call this as “Driver Access” feature. Only authorized keys/fobs registered on the tracking device can start the vehicle.
+ Sleep: .003W
+ Receive: 0.75W
+ Transmit: 10W
+ Idle: 0.85W
+ GPS active: +1.25W
Yes, The SicuroPeople Application have a buffer functionality.
Yes, the Diablo I supports remote immobilisation of the vehicles engine.
For example, if suspicious activity is detected on the platform, such as out of hours use or deviation from a geo-fenced route, the fleet manager or a Sicuro Support team member can send an over the air command to the device which will then immobilise the engine the next time it is turned off. This means that the engine will not just shut off mid-journey, creating a potential risk for other road users and will securely shut down, allowing the user to then send a recovery team or notify the authorities to the tracked location of the vehicle shown on the platform.
No, Clients are advised not to paint any colour to the Orbit I as this may affect the behaviour of the device.
No, the Blanco does not support fuel level monitoring.
Yes, the Diablo II supports remote immobilisation of the vehicles engine.
For example, if suspicious activity is detected on the platform, such as out of hours use or deviation from a geo-fenced route, the fleet manager or a Sicuro Support team member can send an over the air command to the device which will then immobilise the engine the next time it is turned off. This means that the engine will not just shut off mid-journey, creating a potential risk for other road users and will securely shut down, allowing the user to then send a recovery team or notify the authorities to the tracked location of the vehicle shown on the platform.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
55g
1000 mAH
Up to 100 Driver ID's (FOB's)
Up to 4 driver ID's
1 minute when ignition is On and moving. 5 minutes when ignition is On and Idle. 2 hours when ignition is Off and parked.
Yes, the device can be modified and installed via hardwire.
1 minute when ignition is on and moving. 2 hours when ignition is off and parked or idle.
refer to the link: https://itunes.apple.com/ae/app/sicuropeople/id1243379618
To add a new question go to app settings and press "Manage Questions" button.
1950 mAh
Enter your answer here
No, the device needs to be position in a way that it has a clear view of the sky.
Yes! To add a picture follow these simple steps:
Enter App Settings
Click the "Manage Questions" button
Click on the question you would like to attach a picture to
When editing your answer, click on the picture icon and then add an image from your library
1 minute when ignition is On and moving via GPRS. 2 hours when ignition is Off and stationary via GPRS. 5 minutes when ignition is On and moving via Satellite. 2 hours when ignition Off and stationary via Satellite.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
+ Ignition ON (GPRS) Moving = 1 minute
+ Ignition OFF (GPRS) Stationary = 2 hours
+ Ignition ON (Satellite) Moving = 5 minutes
+ Ignition OFF (Satellite) Stationary = 2 hours
refer to the link: https://play.google.com/store/apps/details?id=com.sicuropeople
250mAh
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
+ At 1 minute report rate with GPS fix, approx. 2 days and 19 hours
+ At 1 minute report rate with NO GPS fix, approx. 25 hours
Vehicle Cigar Lighter
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
185g
Yes! Users can add video from YouTube or Vimeo with ease:
Enter App Settings
Click the "Manage Questions" button
Click on the question you would like to attach a video to
When editing your answer, click on the video icon and then paste the YouTube or Vimeo video URL
That's it! A thumbnail of your video will appear in answer text box
Yes! Users can add video from YouTube or Vimeo with ease:
Enter App Settings
Click the "Manage Questions" button
Click on the question you would like to attach a video to
When editing your answer, click on the video icon and then paste the YouTube or Vimeo video URL
That's it! A thumbnail of your video will appear in answer text box
Value is set at 278 cm/s/s (2.78 m/s/s).
5 minutes
When data connection is lost, messages are buffered and they will be sent once data
connectivity is restored. Up to 1,000 messages may be buffered.
Up to 450 driver ID's
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
After successful activation, users only have to login once. There is no timeout. Login is only required if the user reinstalls the app.
The FAQ title can be adjusted in the settings tab of the App Settings. You can also remove the title by unchecking its checkbox in the settings tab.
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in SicuroTrackV2 platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
1.5kg
The Axtaris is not IP rated.
The FAQ title can be adjusted in the settings tab of the App Settings. You can also remove the title by unchecking its checkbox in the settings tab.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
Value is set at 278 cm/s/s (2.78 m/s/s).
20,000 buffered messages.
+ 1 minute report rate (regular tracking) battery life is 31 hours
+ 2 minutes report rate (regular tracking) battery life is 51 hours
+ 5 minutes report rate (regular tracking) battery life is 83 hours
+ 10 minutes report rate (regular tracking) battery life is 105 hours
+ 20 minutes report rate (regular tracking) battery life is 120 hours
+ 30 minutes report rate (regular tracking) battery life is 127 hours
+ 1 hour report rate (regular tracking) battery life is 134 hours
+ 2 hours report rate (regular tracking) battery life is 138 hours
reporting every 1 minute
Value is set at 278 cm/s/s (2.78 m/s/s).
Value is set at 278 cm/s/s (2.78 m/s/s).
Value is set at 278 cm/s/s (2.78 m/s/s).
The emergency number is the number that the SicuroPeopleapp will call when the panic button is activated. Sicuro’s Support number is the default. The emergency number is not user configurable, it can be changed over the air (OTA) by Sicuro Support. Managers may request the emergency number to be changed to any emergency point of contact.
Yes the parameters are supported. The platform is customize to show information from the device into the reports.
5300mAh
Value is set at 278 cm/s/s (2.78 m/s/s).
alue is set at 278 cm/s/s (2.78 m/s/s).
Yes, the platform supports pre and post accident data capture which can be retrieved for analysis and investigation.
“Keep Alive” is a feature in SicuroPeopleespecially developed to make the device send a heartbeat (a periodic location report) every 1 hour.
850 mAh
9-16 VDC
IP66
Value is set at 278 cm/s/s (2.78 m/s/s).
15 minutes
Supports up to 8 channel AHD 720P/ 1080P cameras.
The email address used during the registration on the app will be tied to the device. Thus, the user cannot use this login to other devices. Should a user require a new login to his SicuroPeople app installed on his mobile phone, he should contact Sicuro Support for assistance.
Yes, the platform supports various formats. The reports can also be scheduled to arrive daily, weekly, monthly, and others. Data can be retrieved up to 90 days period by default. Fuel consumption report can be generated, from here the manager can compare actual and target consumption. The fuel information is approximated based on the vehicles’ fuel benchmark.
The GPS/Sat antenna is also used to acquire GPS fixes and therefore no GPS position can be sent without this antenna.
The GPS/Sat antenna is also used to acquire GPS fixes and therefore no GPS position can be sent without this antenna.
Approximately 8 hours
The Vega auto detects any available parameter given by the Vehicle.
You cannot retrieve the script loaded into a terminal using Scope, and you can also set a password to prevent unauthorized users to change the configuration.
Yes, though there a window time for the device to accept commands.
The TAM242 will open its receiver and receive commands at 10:27am UTC for 7.5 minutes.
Yes, the platform provides near real-time monitoring of your assets as long as you have data connection. From the platform, you can also send SMS to your personnel.
You cannot retrieve the script loaded into a terminal using Scope, and you can also set a password to prevent unauthorized users to change the configuration.
When data connection is lost, messages are buffered and will be sent once data connectivity is restored. Up to 1,000 messages may be buffered
IP-67
Yes, various OTA commands can be send to the device including the changing of its reporting rate.
+ Ignition On
+ Ignition Off
+ Device Plugged
+ Device Removed
+ Idling Start
+ Idling End
+ Speeding Start
+ Speeding End
+ Harsh Braking
+ Harsh Acceleration
+ Harsh Turn Left
+ Harsh Turn Right
+ Panic
+ Main Power Lost
+ Main Power Restored
+ Internal Battery Normal
+ Internal Battery Below Threshold
After successful activation, users only have to login once.
Yes, we have a solution that supports reading of basic CANBUS parameters. This requires another peripheral to be connected to the tracking device.
You cannot retrieve the script loaded into a terminal using Scope.
Yes, STV2 fully support Geofence features as described.
The emergency number is the number that the IntelyseYou app will call when the panic button is activated. Sicuro’s Support number is the default. The emergency number is not user configurable, it can be changed over the air (OTA) by Sicuro Support. Managers may request the emergency number to be changed to any emergency point of contact.
Battery-life for up to 2 hours depending on the back-up battery charge.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
190g
The devices could be configured to report in different intervals. This can be discussed according to your requirements.
“Keep Alive” is a feature in IntelyseYou specificallydeveloped to make the device send a heartbeat (a periodic location report) every 1 hour.
Support 3G/4G, Wi-Fi, GPS modules.
Yes, STV2can send the notification via SMS, email or pop-up notification.
1300 mAH
The email address used during the registration on the app will be tied to the device. Thus, the user cannotuse this login to other devices. Should a user require a new login to his IntelyseYou app installed on his mobile phone, he should contact Sicuro Support for assistance.
1.95 A-Hr
IP54
The Delca sends position report every 1 minute when ignition is on moving or static.
While, it sends position report every 5 minutes whne ignition is off and static.
At 1 minute report rate, approx. 4 days and 25 minutes.
Due to the restrictions of Apple policies, LBS data is supported only in Android mobile applications.
221g
H.264 compression.
Yes, this can be configured on the platform or device .
Yes, we provide Google maps on the platform.
Enter your answer here
1100 mAH
When data connection is lost, messages are buffered and they will be sent once data connectivity is restored. Up to 1,000 messages may be buffered.
Users only have to login once. There is no timeout. Login is only required after log off (on the Settings screen) or if the user reinstalls the app.
Approximately 15 hours
The platform can work on low network coverage, users are given the option to limit number of devices they monitor, switch to low-bandwidth mapping options, and others.
Iridium normal size SIM card.
The emergency number is the number that the Sicuro Tracker v2 app will call when the panic button is activated. Sicuro’s Support number is the default.
The emergency number is not user configurable, it can be changed over the air (OTA) by Sicuro Support.Managers may request the emergency number to be changedtoany emergency point of contact.
3,100 mAh
Yes. Real time data from devices are available to view on the platform.
400 mAH
Yes. Events and trip management can be done on the platform including measuring trip time, driver behavior – idling, speeding, harsh events, and others
“Keep Alive” is a feature in Sicuro Tracker especially developed to make the device send a heartbeat (a periodic locationreport)at a default interval of 30 minutes.
+ Continuous 1-minute (standby) = about 7 hours
+ Continuous 5-minutes (standby) = about 2 days
Tripit is a travel management platform that organizes flights of users. Users may add ‘flight plans’ to their account and it can automatically sync to the IntelyseSafe app.
Yes. The devices support user identification, this can be configured per project or driver group.
213g
use NANO SIM card size only
The Argus SE weighs 190g
Yes. Driver behavior are supported in STV2.
1250 mAh
After successful activation, users only have to login once.
Yes. Mileage information can be viewed on the Reports, or on the Monitoring tab.
Enter your answer here
Yes. Users can set the reporting rate from 30 seconds (minimum) to 4 hours (maximum). User has the option to manually start the tracking or can set the device to Auto Tracking On when device is switched on.
ALR (Acceptable Level of Risk) is the threshold level setup by the Administrator based on the user’s flight details and answers to the questionnaire. This can be one of the parameters that admins or companies may depend on whether the travelers can go or not to their journey.
100g
Yes. The platform stores information about overspeeding events, it can also notify via SMS/Email/Screen Pop ups.
Check-in feature of the app is used for Administrator to know the current location of the traveler. Check-in may only be use by the traveler if they have a live/current trip (today’s trip).
Yes. The tracking reports are sent and displayed in the SicuroFleet platform. The device is capable of two way messaging (device to platform and vice versa).
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Yes. Geofences can be manually created on the platform or imported from existing files (KML/KMZ)
Yes, users may open their accounts to other phones if they have the applications.
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
IPX7;The device withstands incidental exposure to water of up to 1 m for up to 30 min
Yes. This can be viewed on the Eco driving Report.
No Vibration but Signal Yes. When SOS button is pressed, the device beeps for 20 seconds until the SOS message is sent
After successful activation, users only have to login once.
Yes, though once the device is switch off the reporting rate will switch back to default before it was changed OTA.
No, Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Yes. Up to 90 days of data can be viewed by default
It is a set of questionnaires that trip administrators assign to the users to determine if they have understood the content that they have viewed.
Yes, user need to download the Earthmate Application and pair the smartphone via Bluetooth.
Yes. Position reports are received on the platform 24/7 as long as the device sends them.
When video content is viewed, it is first downloaded.Users may locate one or more video clips from the channels and remove them. Users may also go to the settings of the app and click on remove all downloaded content.
Yes. Sicuros bespoke tracking platforms come with a range of tools, including the generation of POI's and geo-fencing. The geo-fencing and POI's can be tailored to alert if a boundary is crossed or if a certain proximity is breached.
Yes, users may open their accounts to other phones if they have the applications.
Yes, We can change the reporting rate when outdoors/with GPS fix.
But, we cannot change the heartbeat setting at every 5 minutes when indoors/no GPS fix.
Yes. Maintenance reminders can be set using the mileage or number of days.
IPX7;The device withstands incidental exposure to water of up to 1 m for up to 30 min
Yes, though once the device is switch off the reporting rate will switch back to default before it was changed OTA.
Yes. Multiple user IDs can be created to provide access to the system
Yes, user need to download the Earthmate Application and pair the smartphone via Bluetooth.
Yes. Reports can be scheduled to arrive automatically
Yes. Users can set the reporting rate from 30 seconds (minimum) to 4 hours (maximum). User has the option to manually start the tracking or can set the device to Auto Tracking On when device is switched on.
Yes
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Yes
Yes
NO. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Device Default language is English. The platform is available in a range of Languages, including French and Spanish.
Yes. Excel, PDF, HTML, DOC.
No. Each unit, once activated has a certain amount of Pings per month. This does not pool across multiple units.
Yes
Yes, speed alerts can be applied to certain geofences/areas. These emanate from the platform as SMS/Email and are available on the Reports as well
Yes. Users can set the reporting rate from 1 minute (minimum) to 24 hours (maximum).
The SicuroTrackV2 Route module is a feature of the platform designed to streamline the journey management and route scheduling process of the fleet. The feature allows users to create and configure routes based up addresses or geo-fences and assists in creating of delivery schedules, passenger drop-offs etc. The module can also generate notifications from a range of triggers to enable a fleet manager greater visibility on the journey status of the fleet. Notifications can also show arrival and departure from a checkpoint, skipped checkpoints, delays, outrunning and a range of other fleet data.
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Notifications can be triggered by changes in the status reported by the unit such as arrival, departures, outrunning and delay on scheduled travel time of vehicles from designated checkpoints. The benchmarks that trigger the notifications are customisable and can be configured and set by the users. The notifications are predefined to be displayed either on the platform, email and SMS.
No Vibration or Signal when the SOS button is pressed.
Yes, historical information can be stored on the platform and readily available on reports. This is defaulted to 90 days
NO. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Device Default language is English. The platform is available in a range of Languages, including French and Spanish.
Route reports can also be generated in SicuroTrackV2 platform which can be beneficial for analysis on the vehicle and driver performance based on the route setup and schedule. The reports that can generated are based on unit/unit group rounds and visits, and route events.
No. Each unit, once activated has a certain amount of Pings per month. This does not pool across multiple units.
The platform allows you to input various details - name, description, mobile numbers, and others for users, drivers, vehicles, assets and more. Additionally, it offers the flexibility of adding custom fields (e.g., registration date, blood type, emergency contact, etc.)
Yes, though once the device is switch off the reporting rate will switch back to default before it was changed OTA.
You have the option to start/stop the service whenever you open it. Alternatively, you can leave it reporting in the background.
The platform supports creation of POI and Geofence. From these POI's and Geofences, we can create alerts/alarms when users passes through these points and a notifcation will be sent to the Control Center.
Yes, user need to download the Earthmate Application and pair the smartphone via Bluetooth.
The App requires internet to function properly however, it can store up to 1000 messages when internet is lost and resends all these messages to the platform once restored
Yes. Users can set the reporting rate from 30 seconds (minimum) to 4 hours (maximum). User has the option to manually start the tracking or can set the device to Auto Tracking On when device is switched on.
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Yes, there is no installation required. The platform runs on latest versions of Chrome, Firefox, and IE/Edge. There is a free downloadable monitoring app for both iOS and Android
Yes, Map Popup, reports and email or SMS notification are all supported. For instance you could set up speed limitations on areas; impose curfews on drivers. Sicuro Track V2 has advanced and customisable reporting within the platform.
No Vibrate but Signal Yes. When SOS button is pressed, the device beeps for 20 seconds until the SOS message is sent.
No. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Yes, platform like airports, bases, camp and others. Alo POIs can be generated as small geofences where documentsnt or information can be added such as Security Review PDFs
Yes, In case signal was lost, the platform reported the distance from the last to the next position. The device also buffers the position when data is lost, once connectivity restored the data is sent to platform
Device Default language is English. The platform is available in a range of Languages, including French and Spanish.
No. Each unit, once activated has a certain amount of Pings per month. This does not pool across multiple units.
Yes, The records can be entered in the platform, for example: oil change, air filter change, wheel alignment, and others. There is a vehicle maintenance tab that is optional
Yes. Users can set the reporting rate from 30 seconds (minimum) to 4 hours (maximum). User has the option to manually start the tracking or can set the device to Auto Tracking On when device is switched on.
Yes, The reports can also be scheduled to arrive daily, weekly, monthly, and others to designated staff. Data can be retrieved up to 90 days period by default.
Yes, Odometer stored in the platform and platform automatically accumulates the total odometer value
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
NO Vibrate but Signal Yes. When SOS button is pressed, the device beeps for 20 seconds until the SOS message is sent.
NO. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Device Default language is English. The platform is available in a range of Languages, including French and Spanish.
No. Each unit, once activated has a certain amount of Pings per month. This does not pool across multiple units.
Yes. Users can set the reporting rate from 1 minute (minimum) to 24 hours (maximum).
No, the Apollo does not support Driver Identification.
Yes. The Device has a dedicated SOS button. The SOS alert is sent and displayed in Sicuro Fleet platform. Upon receipt of SOS report, the Platform can notify the users & watchkeepes via SMS, Email & Screen pop up.
Yes, the Apollo supports remote immobilisation of the vehicles engine.
No Vibration or Signal when the SOS button is pressed.
NO. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
No, the Apollo does not support fuel level monitoring.
1 minute when ignition is On and moving. 5 minutes when ignition is On and Static/idle. 2 hours when ignition is Off and Parked.
Device Default language is English. The platform is available in a range of Languages, including French and Spanish.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
No. Each unit, once activated has a certain amount of Pings per month. This does not pool across multiple units.
Yes, The tracking feature is independent from the Iridium SIM Card. The device needs to be activated through the Iridium Portal though to utilise the GPS tracking feature.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
NO. Satelite devices do not upload photographs for the reasons that it uses considerable airtime and bandwidth. There is potential to add a Sat Sleeve to a smartphone with Tracking App that can then send photos using satelite coverage but is an expensive option.
Value is set at 278 cm/s/s (2.78 m/s/s).
Value is set at 278 cm/s/s (2.78 m/s/s).
IP65
247g
Yes,This data is registered on the platform reference to the assigned driver.
Yes, the Rosso supports remote immobilisation of the vehicles engine.
Yes. We call this as “Driver Access” feature. Only authorized keys/fobs registered on the tracking device can start the vehicle.
Up to 100 driver ID's.
1 minute when ignition is On and moving. 5 minutes when ignition is On and Static/idle. 2 hours when ignition is Off and Parked.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
Value is set at 278 cm/s/s (2.78 m/s/s).
Value is set at 278 cm/s/s (2.78 m/s/s).
1 minute when ignition is On and moving. 5 minutes when ignition is On and Idle. 2 hours when ignition is Off and parked.
Yes, An extra ping via GPRS is generated when the vehicle turns by more than 15 degrees.
Yes, speeding event will be triggered and reported to the platform when the device detects a speed of more 100 kph for 20 seconds and the buzzer turns ON.
Value is set at 278 cm/s/s (2.78 m/s/s).
Value is set at 278 cm/s/s (2.78 m/s/s).
No, the Omega does not support Driver Identification.
Yes, the Omega does support remote immobilisation.
No, the Omega does not support fuel level monitoring.